Also available TECHNIVOLT 1100 SMART with the same range of functions, but lower charging power of up to 11 kW.
Die TECHNIVOLT 2200 SMART wird alternativ auch durch das neue KfW-Programm 439 (Ladekonzepte für Kommunen) gefördert. Der Zuschuss beträgt bis zu 9000,- € für mindestens 10 Ladepunkte. Unterstützt werden Ladestationen an Stellplätzen ohne öffentlichen Zugang. Also Stellplätze, die nur für Beschäftigte der Kommunen zugänglich sind.
With the charging power of 22kW, you can also charge an electric vehicle with a larger battery capacity quickly and effectively. Use the simplified charging calculator to see the time in which the TECHNIVOLT 2200 SMART fully charges your vehicle from 0 to 100. The times determined are theoretical, maximum loading times. The common recommendation is to charge an e-car with a remaining battery capacity of approx. 20% to approx. 80% of the total battery capacity.
If the e-charging station is freely accessible in the driveway or carport, access protection is useful to prevent unauthorized persons from charging. You can use the supplied master card to register up to 20 user cards on the TECHNIVOLT 2200 SMART. Two user RFID cards are already included in the scope of delivery to enable convenient and safe charging only after prior authorization. You can train any other RFID card as user cards at any time.
The colored light ring indicates the readiness for charging or the current charging process. In this way, you always stay informed about the operating status of the wallbox in a simple and understandable way.
Now it's getting very technical, but also important! The TECHNIVOLT 2200 SMART already has an integrated electronic detection of smooth DC residual currents in the range of IΔn ≥ 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC fault current greater than 6 mA. For the electrician who connects the wallbox, this means that he only needs a type A residual current circuit breaker, which is significantly cheaper than a type B switch.
The wallbox may only be connected by a professional electrician or the power grid operator. Above all, it is important to keep an eye on the total electrical output of the connection. Because some house connections allow a total output of up to 43 kW - charging with the 22 kW wallbox is usually still possible here. Often, however, a house connection only provides a total output of approx. 22 kW. If other consumers, especially large consumers, are active in addition to the charging station in the household, charging an e-car will be difficult. For this reason, the 22kW wallbox must also be approved by the network operator before it is installed and put into operation.
TECHNIVOLT 2200 SMART charging station, front glass pane, assembly instructions, operating instructions, assembly template, fastening set (4x Fischer SXRL 8 x 60 FUS A4), angle key (Torx-TR 20), locking screw for glass pane (Torx-TR 20 M4), 2x user RFID card
Cable and plug holder type 2